Products Description
The biggest feature of the pull-out faucet is that it can be pulled out for use, so the cleaning range is expanded. The kitchen is equipped with a sink. It is very convenient to clean the sink. It can rotate 360 degrees. Hold the faucet for a circle, and the four walls and corners of the sink can be flushed. After using the faucet, you can retract it. It is very convenient to wash dishes, flush the sink, or put water in the container.

The induction faucet is based on the principle of infrared reflection. When the human hand is placed in the infrared area of the faucet, the infrared ray emitted by the infrared ray emitting tube is reflected by the infrared ray receiving tube due to the blocking of the human hand, and the signal processed by the microcomputer in the integrated circuit is sent to the pulse electromagnetic valve. After the electromagnetic valve receives the signal, it opens the valve core according to the specified instruction to control the faucet to discharge water; When the human hand leaves the infrared sensing range, the solenoid valve does not receive the signal, and the solenoid valve core is reset by the internal spring to control the water shutoff of the faucet.

Among them, is the principle of electromagnetic induction: when people are regarded as conductors and are in the magnetic field formed by a 50Hz alternating current, electromagnetic induction will occur, and then the human body will generate an induced current, which reacts to the original electromagnetic field and changes the original current. When this change is received by the circuit, the water will be discharged through the electromagnetic relay. The infrared receiving body temperature is 37 degrees. When it is higher than room temperature, it will radiate infrared rays. The sensor receiving this radiation will make the faucet run. Infrared reflection: the infrared emitting tube emits a beam of infrared rays toward the water flow direction. When the hand reaches the faucet, the infrared rays are reflected by the hand. The infrared receiving tube receives the infrared light and sends the signal to the internal circuit. After being processed by the internal circuit, the electromagnetic faucet is turned on and the faucet is turned on; When the hand leaves the faucet, the infrared ray is no longer reflected, and the power supply of the electromagnetic faucet is turned off to stop the water supply.

Contact Information
tel: +86-15659535208
envelope: sunny@besllin.com
whatsapp: 8618144165166
address: Xiamen City, Fujian Province, China




